Relative equilibria in quasi-homogeneous planar three body problems

In this paper we find the families of relative equilibria for the three body problem in the plane, when the interaction between the bodies is given by a quasi-homogeneous potential. The number of the relative equilibria depends on the values of the masses and on the size of the system, measured by the moment of inertia.     

A comparative study of ionospheric IRIEup and ISP assimilative models during some intense and severe geomagnetic storms

Three-dimensional (3-D) electron density matrices, computed in the Mediterranean area by the IRI climatological model and IRIEup and ISP nowcasting models, during some intense and severe geomagnetic-ionospheric storms, were ingested by the ray tracing software tool IONORT, to synthesize quasi-vertical ionograms. IRIEup model was run in different operational modes: (1) assimilating validated autoscaled electron density profiles only from a limited area which, in our case, is the Mediterranean sector (IRIEup_re(V) mode); (2) assimilating electron density profiles from a larger region including several stations spread across Europe: (a) without taking care of validating the autoscaled data in the assimilation process (IRIEup(NV)); (b) validating carefully the autoscaled electron density profiles before their assimilation (IRIEup(V)).The comparative analysis was carried out comparing IRI, IRIEup_re(V), ISP, IRIEup(NV), and IRIEup(V) foF2 synthesized values, with corresponding foF2 measurements autoscaled by ARTIST, and then validated, at the truth sites of Roquetes (40.80°N, 0.50°E, Spain), San Vito (40.60°N, 17.80°E, Italy), Athens (38.00°N, 23.50°E, Greece), and Nicosia, (35.03°N, 33.16°E, Cyprus). The outcomes demonstrate that: (1) IRIEup_re(V), performs better than ISP in the western Mediterranean (around Roquetes); (2) ISP performs slightly better than IRIEup_re(V) in the central part of Mediterranean (around Athens and San Vito); (3) ISP performance is better than the IRIEup_re(V) one in the eastern Mediterranean (around Nicosia); (4) IRIEup(NV) performance is worse than the IRIEup(V) one; (5) in the central Mediterranean area, IRIEup(V) performance is better than the IRIEup_re(V) one, and it is practically the same for the western and eastern sectors.Concerning the overall performance, nowcasting models proved to be considerably more reliable than the climatological IRI model to represent the ionosphere behaviour during geomagnetic-ionospheric storm conditions; ISP and IRIEup(V) provided the best performance, but neither of them has clearly prevailed over the other one.     

硅氮烷环体的催化聚合及热解制备Si3 N4 材料

采用甲基氢二氯硅烷的氨解产物硅氮烷环体(MHSZ)为原料,以四丁基氟化铵为催化剂,制备了高分子量的硅氮烷聚合物(PHSZ),结合红外、核磁、凝胶色谱仪和热重分析了反应时间对合成的PHSZ结构、组成、分子量和陶瓷产率的影响。考察了低温氨气,高温N2气氛处理工艺对热解产物结构和组成的影响。结果表明,随着反应时间的延长,PHSZ高聚物的分子量提高,热失重降低;采用该热解方式PHSZ可转化为含碳量仅为0.5wt%的Si3N4材料,热解样品在1 600℃时完全结晶,晶相主要是α-Si3N4。     

基于可变滑动窗口与3σ准则的脉冲星信号去噪算法

针对地面接收射电观测脉冲星信号较弱、信噪比较低的问题,提出了基于可变滑动窗口与两层3σ准则的信号去噪算法。该算法引入可变滑动窗口,对信号进行分步连续处理,同时在筛选噪声时使用两层3σ准则算法,解决了噪声遗漏及过度去噪问题。为证明算法可靠性与实用性,利用佳木斯66 m观测站实测数据进行算法验证,针对J1939+2134与J1744—1134脉冲星的实测数据进行分析处理。结果表明,该算法能够对脉冲星数据进行有效去噪,普遍提高信噪比约10dB。     

月球取样返回器分离阻力分析与地面分离试验验证

探月工程三期研制的月球取样返回器与轨道器间采用导向装配方式,装配后存在一定预应力,同时在轨两器分离时受空间环境作用而出现热变形,引起的分离阻力会对两器的正常分离产生影响。文章对返回器与轨道器的分离阻力进行分析和测量,并开展相关地面分离验证试验,结果表明,在轨环境引起的分离阻力约为366 N,地面装配应力引起的分离阻力约为160 N,两器分离速度约为0.24 m/s。研究结果可为轨返两器的分离设计提供参考。     

支化3,3-二叠氮甲基环氧丁烷-四氢呋喃的合成及表征

以3,3-叠氮甲基环氧丁烷-四氢呋喃(PBT)为起始聚醚,三官能度的支化单元为引发剂,在催化剂的作用下,通过亲核加成反应合成一种具有新型支化结构的PBT(B-PBT)。采用FTIR、~1H-NMR、粘度测试、DSC、TG和拉伸测试,对目标产物的结构、粘度特征、热稳定性以及力学性能进行表征。结果表明,所合成的目标产物为具有支化结构的叠氮缩水甘油醚;B-PBT的粘度(15 000 mPa·s/50℃)明显低于PBT(23 828 mPa·s/50℃);引入支化单元后,B-PBT热稳定性仍保持良好,放热达到1481 J/g;产物热分解分为两个阶段,即叠氮基热分解、支化单元以及主链的断裂和小分子的热解;制备的B-PBT弹性体拉伸强度达到5.29 MPa,延伸率达到516.42%,力学性能良好。     

The Solar Sail Materials (SSM) project – Status of activities

SSM (Solar Sail Materials) is an on-going project for the European Space Agency (ESA) relying on past and recent European solar sail design projects. It aims at developing and testing future technologies suitable for large, operational solar sailcrafts.     

高校委托工程审计的质量控制与评价指标体系构建

委托工程审计质量关系到高校工程审计职能的发挥和投资建设目标的实现.结合高校工程审计实践,探讨高校委托工程审计质量控制关键路径,并据此构建质量评价指标体系,以实现高校委托工程审计质量有效控制和科学评价.     

三维编织复合材料热物理性能的有限元分析

根据三维编织复合材料的细观结构,分别建立了三维四向和五向编织复合材料热物理性能的有限元模型.采用周期性的非绝热温度边界条件和位移边界条件,计算了三维四向和五向编织复合材料的整体等效热传导系数和热膨胀系数,计算结果同已有文献相比与实验值符合得更好.在此基础上,迸一步研究了编织角、纤维体积分数、编织结构等参数对材料热物理性...     

Surface Roughness Effects on Vortex Torque of Air Supported Gyroscope

In order to improve the drift precision of air supported gyroscope, effects of surface roughness magnitude and direction on vortex torque of air supported gyroscope are studied. Based on Christensen’s rough surface stochastic model and consistency transformation method, Reynolds equation of air supported gyroscope containing surface roughness information is established. Also effects of mathematical models of main machining errors on vortex torque are established. By using finite element method, the Reynolds equation is solved numerically and the vortex torque in the presence of machining errors and surface roughness is calculated. The results show that surface roughness of slit has a significant effect on vortex torque. Transverse surface roughness makes vortex torque greater, while longitudinal surface roughness makes vortex torque smaller. The maximal difference approaches 11.4% during the range analyzed in this article. However surface roughness of journal influences vortex torque insignificantly. The research is of great significance for designing and manufacturing air supported gyroscope and predicting its performance.